Home > Products > BandMasks > BandMask 28

BandMask 28

Body: 

KMB28 Top Tab

  • Manual 18/28
    This is your operations and maintenance manual. It is a writable USB flash drive which enables you to add or subtract the manual PDF sections as they are updated or when you purchase new Kirby Morgan products.
  • Logbook w/ pen
CE Logo

kmb28_tabber

Weight:

KMB® 18 - 13.63 pounds
KMB® 28 - 12.73 pounds

Mask Frame:

KMB® 18: Fiberglass, polyester resin, polyester gel coat, and carbon fibers Mask Frame KMB® 28: Xenoy thermoplastic

Control Knobs:

Polyurethane

Face Port/Lens:

Scratch Resistant Polycarbonate

Hood:

Neoprene

O-Rings:

Buna-N

Recommended Lubricants:

Christo-Lube®, Dow Corning® MS4 Silicone Lubricant. Krytox® and Halocarbon® are also acceptable.

Regulator:

SuperFlow® 350 Performance. The SuperFlow® 350 regulator on the Kirby Morgan 18 & 28 masks offers high performance. The regulator has been tested at Dive Lab at Panama City, Florida. It meets all current U.S. Navy and European diving standards.

Cage Code:

The cage code for identifying KMDSI products for U.S. government purposes is 58366.

CR Standards:

These helmets meet or exceed all standards established by Dive Lab of Panama City, Florida, and are CR (Commercially Rated) marked.

Note

The minimum operating temperature recommended for this mask is 34 °F (1 °C), without the use of the water shroud P/N 525-100 and hot water.

Without a hot water shroud, the diver may be subject to hypothermia due to cold gas inspiration temperatures.

NOTE: Usually the greatest danger of demand regulator icing will be encountered on deck when the surrounding air temperature is less than 32 °F (0 °C). This effect is primarily due to the refrigeration effect of breathing air pressure reduction, and the addition of moisture from the diver’s exhalation coming in contact with the topside air temperature.